Genmar Risers

Quality handlebar risers for modern sports bikes  Stop Sports bike back ache!

GenMar Manufacturing was founded in 1986 by Gene Waggoner, a motorcycle racer and enthusiast. Their handlebar risers are machined from billet aluminum.  Shaped like the base of your handlebar mount, they will raise the handlebars upward and back (due to the fork angle), still leaving the motorcycle with a very stock look.  Most riders will have to sit on the bike to notice there is something different.  Raising to bars up even a mere 3/4" makes a huge difference in the weight on your hands. 

Raising your bars with a spacer design, like our handlebar risers, you raise the bars but still retain the stock angle.  This is very important to maintaining even weight distribution across you hands during braking and turning.  The GenMar Handlebar Riser is designed to raise your handlebars the maximum your motorcycle will allow.  The handle bars will not hit the fairing or the tank when turned full left or full right.  There is no need to remove or change any of the control on most models. Most installations can be completed in as little as 15 minutes. 

Honda VTR1000 Handlebar Risers

H-116
Add to cart
H-116 risers for Honda - VTR1000 1998 - Current The risers are placed between the fork crown and the handlebars to raise the bars up 3/4 (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses

Bonneville Handlebar Risers

T-114
Add to cart
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm)and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Handlebar cap shown for reference.

Yamaha FJR1300 01-05 Handlebar Risers

Y-103
Add to cart
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

Yamaha FJR1300 06-07 Handlebar Risers

Y-203
Add to cart
 The risers are placed between the fork crown and the handlebars to raise the bars up 1 " (25mm) and back 1/2 " (12.5mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

VFR800/VFR750 90+ Mirror Extenders

H-217
Add to cart
Designed to move the mirrors outward to help eliminate the rider's arm from the rearward view. The mirrors are moved  1" (25mm) further out from the fairing. Spacers are machined from black nylon and come with all the hardware needed for installation. Mirror included in photo for reference only.

VFR800 2K Mirror Extenders

H218
Add to cart
Model without the rubber boot. VFR800 2K Model